Description Product Description Step 1 – Remove the protective cap and push the power buttom During an internal self-check, the display shows all segments. Then the last temperature taken will be displayed for 5 seconds. The Hygiene cap indicator will blink to signal one is needed. To achieve accurate measurements, make sure a new, clean Hygiene cap is in place before each measurement. Step 2 – Fit the probe snuggly into the ear canal and direct towards opposite temple Then push and release the Start button. Step 3 – ExacTemp light will pulse while temperature measurement is in progress. The light will remain solid for 3 seconds to indicate that a successful temperature reading has been achieved. The confirmation beep indicates that an accurate temperature measurement has been taken. The result is shown on the display. Step 4 – For the next measurement Press Eject button to remove and discard used Hygiene cap, and put on a new, clean Hygiene cap. The Braun ThermoScan Ear thermometer turns off automatically after 60 seconds of inactivity. The thermometer can also be turned off by pressing the Power button . The display will briefly flash OFF and it will go blank.
