PXKA Rolling Bearing 606zz

Model: 606ZZ/606RS Single row, pre-lubricated, normal accuracy. Deep groove ball bearings are one of the most widely used rolling bearings. They are used to withstand radial and axial loads in both directions. Ball bearings have low friction and high speed, are cost effective and require little maintenance. The bearing steel is made by heat treatment, with high hardness, uniformity, good wear resistance and high contact fatigue performance. Suitable for a variety of industrial equipment, micro-motors, small rotating electrical machines, office equipment, etc. Selection guide: Shield (specified suffix Z / ZZ) – High speed. Prevent dust and debris. Seal (designated suffix RS / 2RS) – Made of steel plate reinforced NBR (oil and liquid resistant). The lower limit speed is lower than Shield Bearings. Shield type: double shield Inner ring / outer ring material: bearing steel Cage material: stamped steel Inner diameter (d): 6mm Outer diameter (D): 17mm Thickness (B): 6mm Dynamic rated load (Cr): 1.95kN Static load rating (Cor): 0.74kN Accuracy level: P0/ABEC-1 Hardness H: 60-62/50-55 Cage type: claws Vibration / noise level: Z1-Z4